Manual version of x ray collimator

Depending on how the x ray collimator works, it can be categorized as manual x ray collimator light bulbs, electric x ray collimator light bulbs and fully automated x ray collimator light bulbs.

Tell us about the manual x ray collimator light bulbs today. Manual x ray collimator light bulbs are mostly used for photography, and electric x ray collimator light bulbs are mostly used for perspective. The two limiting beam principle structures are basically the same, except that the adjustment power is different. Today, I will mainly tell you about the manual x ray collimator light bulbs.

Manual x ray collimator light bulbs directly open and close the x ray collimator light bulbs. There are two types of operation: knob type and pull rod type. The adjustment knob or the adjustment lever is provided with a corresponding position illumination field size indicator scale. In this way, the required field size at a predetermined distance can be roughly adjusted before the illumination field indicator lights up. Correct use can shorten the lighting time.

The three x ray collimator light bulbs that Newheek sells are all manual.
Tell us about Newheek x ray collimator NK102:

Application: it can be used on normal radiography x-ray machine
Technical Parameters
Max Irradation Field: 440mmx440mm (SID=100cm)
Light Field Average Luminance: >160lux
Lumination Ratio: >3:1
Lamp: 24V/100W
Lamp Single Lighting Time: 30S
X-Ray Tube Focus-Mounting Serface Distance: 60mm
(it can be adjusted according to requirement)
If you want to know more about Newheek x ray collimator, please contact our customer service.

Author:Alina