HomeBlog ›What technical standards are required for x ray collimator for 500 mA x-ray machines?

What technical standards are required for x ray collimator for 500 mA x-ray machines?

The beam limiter for 500 mA x-ray machine requires a large x ray collimator. The 500 mA x-ray machine is a fixed X-ray machine. It is a high-dose X-ray machine in the X-ray machine type. It can be used to photograph the human body such as the chest and limbs. Various parts.
What technical standards are required for x ray collimator for 500 mA x-ray machines
Newheek’s x ray collimator for the 500mA x-ray machine is the NK202. This x ray collimator is our x ray collimator for stationary X-ray machines.
Basic configuration and technical parameters of the x ray collimator for 500mA x-ray machine: suitable X-ray tube maximum voltage is 150kV; maximum illumination field is SID (FFD) = 1000mm hour, not less than 430mm x 430mm, minimum illumination field 0x0 mm, intrinsic filter: 1 mm·Al / 75 kVp, additional filter: 1 mm·Al and 2 mm·Al, guide vane control mode: manual, working power supply: 24 V AC / DC, 150 W (minimum Safety voltage)
What technical standards are required for x ray collimator for 500 mA x-ray machines

Author:Abby